Qeridoo GmbH
Industriepark Nord 100
53567 Buchholz, Germany
Phone: +49 (0)2683 9451925 (hotline:
Mon.–Thu.
09:00–12:00 and 14:00–16:00)
Fax: +49 (0)2683 9466577
Email: info@qeridoo.de
Website: www.qeridoo.de
Product name
Polygon adapter 3/8x26
Article numbers
Product description
Polygon adapter 3/8x26 made of stainless steel with anti-twist function for a secure coupler connection on the bike trailer, compatible with all Qeridoo models, including mounting kit
Intended use
This product is intended exclusively for use with Qeridoo products. Check compatibility with your Qeridoo beforehand.
Improper use
This product is not a children's toy and must not be used as such. Do not use this product on bikes that are not suitable for towing a trailer.
Technical data
- Material: Black anodized stainless steel
- Dimensions: 2.2 x 2.2 x 3.4 cm
- Thread: 3/8 x 26
- Recommended tightening torque: 45 Nm
- Weight: 0.073 kg
When using accessories, their weight must be deducted from the payload. The empty weight of the Qeridoo with installed accessories plus the load must not exceed the permissible total weight. According to StVZO (German Road Traffic Licensing Regulations | applicable in Germany), the maximum total weight for unbraked trailers is 40 kg.
Assembly requires a torque wrench (0–50 Nm) with a 13 mm and 19 mm adapter.
This adapter is not suitable for bikes with a carbon frame, carbon dropouts, or a carbon rear frame (risk of breakage!).
Safety and warning instructions
WARNING!
- Secure the bike against tipping and ensure the rear wheel cannot fall out of the axle dropout after loosening the screw connection. Use a repair stand or turn the bike so it can rest on the saddle and handlebars.
DANGER!
- Proper installation is critical for safe trailer operation. Improper attachment can come loose while riding — potentially causing serious accidents. If you are unsure, have the installation carried out by a qualified workshop. Compatibility must be checked before installation. This adapter is not suitable for bikes with a carbon frame, carbon dropouts, or a carbon rear frame (risk of breakage!).
- The polygon adapter and the screw must be tightened firmly to ensure adequate clamping force.
Care and storage instructions
- Clean after use and store in a dry place
- Do not expose to permanent moisture or aggressive chemicals
- For cleaning, use only water and common household cleaning products such as dish soap, fabric care products, or soft cloths
- Keep out of the reach of children
Due to the design of the coupler, minor signs of wear in the form of scratches may occur at the connection point between the bike frame and the coupler. This does not constitute grounds for a complaint.
Conformity & Safety
This product was developed and manufactured in accordance with the applicable EU safety requirements. The materials used comply with the relevant safety and quality standards.
Manufacturer information
Qeridoo GmbH
Industriepark Nord 100
53567 Buchholz, Germany
www.qeridoo.de
Email: info@qeridoo.de
Fax: +49 (0) 2683 9451925
